electronic remote control lock best price

Features One million codes to choose from. One master code, one user code and emergency code.

  1,Key pad entry to unlock

The user code can be 1-8 digits, the factory default code is 12345678

2,Remote control to unlock

To change user code

To change user code: First enter user code (1-8 digits),then press #key, green light should be on, while the green light is on, press * key,the yellow light should be on; enter new code, then press * to confirm.If you hear 3 beep sounds and yellow light is off, then you have successfully changed the user code. However, if you hear 4 beep sounds,repeat this process one more time.

Note: Once you enter change mode (yellow light is on), if there is no input within 8 seconds, the lock will automatically exit the change mode and return to ready mode)

To change remote control user code

To change user code: The following operations are all performed on remote key pad.Enter # twice, now the remote control is in ready mode, enter user code (1-8 digits, within one meter (3 feet) and point to door lock housing), then press # key, green light should be on, while the green light is on, press * key; the yellow light should be on; enter new code, then press * to confirm.If you hear 3 beep sounds and yellow light is off, then you have successfully changed the user code. However, if you hear 4 beep sounds, repeat this process one more time.

Note: Once you enter change mode (yellow light is on), if there is no input within 8 seconds, the lock will automatically exit the change mode and return to ready mode)

To change remote control user code

To change user code: The following operations are all performed on remote key pad.Enter # twice, now the remote control is in ready mode, enter user code (1-8 digits, within one meter (3 feet) and point to door lock housing), then press # key, green light should be on, while the green light is on, press * key; the yellow light should be on; enter new code, then press * to confirm.If you hear 3 beep sounds and yellow light is off, then you have successfully changed the user code. However, if you hear 4 beep sounds, repeat this process one more time.

Note: Once you enter change mode (yellow light is on), if there is no input within 8 seconds, the lock will automatically exit the change mode and return to ready mode)

Open door

1, Key pad entry to unlock: Enter correct user code, press #, green light is on, then rotate handle to open the door.If you enter wrong code4 times, then it will enter lockout mode for 60 seconds.

2, Remote control to unlock: Press # twice, after yellow light is on, use remote control to enter correct user code, press #, green light is on, then rotate handle to open the door.If you enter wrong code 4 times, then it will enter lockout mode for 60 seconds.

Reset of user code

Whenever the remote control is used to unlock, user code is reset to factory default code 12345678 automatically

Low voltage reminding

When the electronic lock is at unlock status, if red light is on, it means the battery is low, make sure to replace a new battery immediately to ensure the electronic lock work normally.

 

 

electronic remote control lock best price