fingerprint lock Finger Print Lock With Higher Security

1.Fingerprint lock for safe box or gun safe box 2.LED display 3.Alarm system

1, the system initialization

Pressand hold the red button ,the red and green LED flash by turn ,after 10 seconds,when you hear one long beep, that prompts that your system initializesuccessfully.

Enrollment of The user fingerprintsThefirst step, press the red button.

The second step ,when you hear “beep beep” twice short sound ,the fingerprintsensor flash red ,put your finger on the top of the sensor ,when the red lightturns off.

The three step, then you hear a long “beep” you register the fingerprintsuccessfully .If you hear ‘beep ”threetimes that mean you register unsuccessfully .

Note: if you press the red button you hear “beep”three time immediately,that tell you fingerprints memory is full.

Fingerprint access to unlock

Press the “Start” button,the fingerprint sensor light red, put your finger which has been registereduntil the red light turn off ,take finger away,

You hear “beep” once longsound, the green LED light ,the safe door is open.

If the red and green LEDflash three time at the same time ,thefingerprint access unsuccessfully.

Deleting the user fingerprint

Press and holdthe red button ,the red and green LED flash by turn ,after 10 seconds ,when youhear one long beep, all fingerprints are deleted.

Code

To change the code

The first step :press and hold 1 key about 2 seconds until the greenLED light and hear a beep ,loose the key ,input the old code ,then press the “Start”button to confirm.

The second step: not longer you will hear the two short beeps ,theninput the new code (4-8digits),then press the “Start” button to confirm.

The third step: enterthe new code again ,press the “Start” button ,you will hear a long beep ,youchange the code successfully .if you hear three short beeps you change the code unsuccessfully.

Introduction :the factory code is “1 2 3 4”

Usethe code to open the door

Input the code the press the “Start” button ,you hear along beep .the motor works open the doorsuccessfully.

Note: when you are in operating process, the red LED light is not normal,thatindicate the voltage is low ,you need change the battery as soon as possible.

fingerprint lock Finger Print Lock With Higher Security